A clean agent is any type of fire extinguishing agent that is electrically non-conductive, volatile, or gaseous, and that does not leave a residue upon evaporation. Clean agent fire suppression systems make use of an inert gas or chemical that is stored in a container and discharged when a fire is detected.
This type of fire extinguishing agent gets its name, “clean”, from the fact that it doesn’t leave a residue, but also because most clean agents are significantly more environmentally friendly than other options.
Clean Agent System Main Equipment Are As Below
Clean Agent Cylinder
Cylinder sizes from 20 lb to 1200 lb.
The valve is available in stainless steel.
Electric Solenoid
Explosion proof
24 VDC, 11 or 15 Watts
Pneumatic Actuator
Valve Assembly Adjustable stem packing Working Pressure:1000psi / 800psi
End type: Threaded
Local Manual Control
Self-venting
Solid brass construction
Stainless steel operation
lock-pin
Shuttle Valve
Size: 1”, 1 ½”
Connects two cylinders
to a common discharge
pipe and nozzles
Discharge Nozzle
Type: Sidewall or Central
Size: ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2”
Angle: 180°or 360°
Actuator Control
High quality brass construction
Self-venting Mounts directly on top of cylinder valves
Check Valve
Size: 1”, 1 ½”, 2 ½”
Prevents backflow from Discharge
Pressure Operating Switch
Inductive 28 VDC
Reset: Automatic
Pressure Supervisory
Switch
240 psi or 360 psi
Operation is normally closed or normally open
Flexible Hose
Accessories
Length: 18 inch
Material: Rubber or stainless steel braided
Control Panel &
Detector
Automatic fire suppression systems control and extinguish fires without human intervention.
