Find valves approved for pressure-rated fire sprinkler systems, Underground fire water rings, stand pipe & Hose system, Pump House and etc. Broad selection of valves including butterfly,OS&Y gate, NRS gate, check, in addition to indicator posts and strainers. The promise of quality is backed by the our warranty, service expertise, and selection assistance. Our range of ductile iron valves are available in different type and models to comply almost all requirements of fire protection applications. valves have flanged end connections either ANSI/AWWA or DIN PN16 or in some models with Grooved Connection. All valves are fusion bonded epoxy coated complies with ANSI/AWWA C550.
Gate valve is bi-directional isolating valves, and it opens by lifting a round or rectangular gate out of the path of water flow. When fully open, gate valve has no obstruction in the flow path, resulting in very low friction loss.
Check valve, also known as non-return valve, one-way valve, is used to allow water to flow through it in only one direction, and it works automatically without any external control. The disc swings off the seat to permit forward
Gate valve is bi-directional isolating valves, and it opens by lifting a round or rectangular gate out of the path of water flow. When fully open, gate valve has no obstruction in the flow path, resulting in very low friction loss.
Strainer is designed to separate debris from flow to provide economical protection for pumps and valves in fire pipeline. It is usually installed at inlet side of valves and furnished with strainer screen, drain connection and pipe
Foot valve is designed to install at the suction side of the pump to minimize head loss and optimize pumping efficiency. And it has a screen which prevents debris from entering the piping system.
Rubber expansion joint, also known as compensator, is a flexible connector furnished by rubber bellow and swiveling steel flange. It allows pipeline for compression, extension and angular movement. It also reduces noise, and absorbs
Ball valve is a kind of quarter-turn valve, and it uses a hollow and pivoting ball to control flow. It is open when the ball’s hole is in line with the flow and closed when it is pivoted 90-degree by the valve handle. Brass ball
A pressure-reducing valve maintains lower pressures in branches of hydraulic systems. The system relief valve or other pressure-setting device determines upstream main system pressure. A pressure-reducing valve is.
Pressure relief valve (PRV) opens and closes automatically at a pre-set pressure to relieve excess pressure so to protect fire pump. When fire pump starts and the set pressure is exceeded, the pressure relief valve
Waste cones are designed to provide quick-and-easy visual confirmation of proper water flow in fire protection systems. Two sight glasses extending from the center of the waste cone allow users to observe the flow of water and
Vortex Inhibitors are provided to attachment to pump suction pipes installed in cleaned water storage tanks. They are design to eliminate any vortex within the pump suction pipes, hence ensuring the pump is fully
The Alarm Check Valve serves as a check valve by trapping pressurized water above the clapper and preventing reverse flow from sprinkler piping. The valve is designed to initiate an alarm during a sustained flow of water